Reverse The Door Opening - BOMANN KG 320.1 Bedienungsanleitung

• Ensure that your mains power corresponds with the specifications of the appliance. The specifica-
tions are printed on the rating label.
• Connect the mains cable to a properly installed and earthed wall outlet.
If required, the door openings can be moved from the right (supplied condition) to the left side.
WARNING: WARNING:
WARNING: WARNING:
When replacing the door stops, the appliance must be disconnected from the power supply. Always
unplug the appliance first.
CAUTION: : : : CAUTION
CAUTION CAUTION
Remove or secure the door racks and glass shelves from possible damages.
NOTE: : : : NOTE
NOTE NOTE
• When installing, ask another person to assist.
You need:
screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
•
• Dismount the upper door hinge by loosening
the screws. Open the fridge door a little and
take it carefully of the middle door hinge.
• Remove the blind cap (B) of the fridge door.
Insert the blind cap (A) contained in the de-
livery scope.
• Loose the screw (1) and remove the door
stopper (2) of the fridge door. Fix the door
stopper (3) contained in the delivery scope
with the screw (1). Place the door on a pad-
ded surface to prevent it from scratches.
NOTE: Keep the blind cap (B) as well as the door stopper (2) for a further possible door opening NOTE:
NOTE: NOTE:
reverse.
• Dismount the middle door hinge by loosening
the screws. Open the freezer door a little and
take it carefully of the lower door hinge.
Place the door on a padded surface too.
• Transfer the cover caps at the opposite
holes.

Reverse the Door Opening

Reverse the Door Opening
Reverse the Door Opening Reverse the Door Opening
23