Unpacking The Appliance; Overview Of The Appliance - BOMANN KSR 350 Bedienungsanleitung

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

be replaced only by the manufacturer, by our customer service or by quali-

fied person and with a cable of the same type.

• Use the provided collection points of electrical equipment for the disposal of

the appliance.

Coolant

WARNING

WAR

NING: : : :

WAR

NING

The coolant circuit of this device contains the refrigerant Isobutane (R600a), a natural gas that is

flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get dam-

aged during transport and installation of the device.

If the coolant circuit is damaged:

• It is imperative to avoid any open flames or ignition source.

• Thoroughly air the room in which the device is installed.

1. Remove the appliance from its packaging.

2. The device and parts of the interior are protected for transport. Remove all adhesive tapes from the

unit lid. You may remove adhesive residue with a cleaning solvent. Also remove any adhesive

tapes and packaging materials from the inside of the device.

3. To prevent hazards, check the appliance for any transport damage.

4. In case of damage, do not put the device into operation. Contact your trader.

NOTE: : : :

NOTE

Production residue or dust may have collected on the appliance. We recommend cleaning the appli-

ance according to chapter "Cleaning and Maintenance".

NOTE

NOTE: : : :

The drawing can deviate from the original device.