Transport And Packaging; Unpacking The Appliance; Appliance Equipment; Installation - BOMANN KSG 238.1 Bedienungsanleitung, Garantie

• Do not try to repair the appliance on your own. Always contact an au-
thorized technician. To avoid the exposure to danger, always have
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type.
• Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coolant Coolant
Coolant Coolant
WARNING: Risk of fire / flammable WARNING: Risk of fire / flammable
WARNING: Risk of fire / flammable WARNING: Risk of fire / flammable
materials materials
materials materials
The coolant circuit of this unit contains the refrigerant
Isobutane (R600a), a natural gas that is flammable
and of high environmental compatibility. Make sure
no parts of the coolant circuit get damaged during
transport and installation of the appliance.
If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged:
• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is
installed and
• contact an authorized technician.

Transport and Packaging

Transport and Packaging Transport and Packaging Transport and Packaging
Transport the appliance Transport the appliance Transport the appliance Transport the appliance
Transport the appliance, if possible, in vertical posi-
tion. Otherwise, it is absolutely necessary to allow
the appliance standing upright for a few hours before
installation "Prior to first use". Protect the appliance
during transport against weather influences.

Unpacking the appliance

Unpacking the appliance Unpacking the appliance Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE NOTE: : : :
NOTE NOTE
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".

Appliance Equipment

Appliance Equipment Appliance Equipment Appliance Equipment
Appliance overview Appliance overview
Appliance overview Appliance overview
Delivery scope Delivery scope Delivery scope Delivery scope
4x Grid shelf, 1x bottle holder, 2x key for door lock
Conditions for the installation location Conditions for the installation location Conditions for the installation location Conditions for the installation location
• Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
16
1 1 1 1 Temperature control /
Interior light with
on/off switch
2 2 2 2 Grid shelves
3 3 3 3 Bottle holder
4 4 4 4 Door lock

Installation

Installation Installation Installation