Control Settings; Heating Of The Sauna - Sawotec MN-23NB Bedienungsanleitung

Control Settings

THERMOSTAT
Adjust the temperature of the sauna by simply turning the operating knob. Thermostat
support automatically the choosen temperature.
In case the heater overheats, the safety sensor will automatically stop the heater even if the
timer is on. Find out for what reason the heater overheated. The reason for this could be too
tightly placed sauna stones, heater´s location or inappropriate ventilation. If this occurs, find
out the cause and fix the problem before resetting the safety sensor.
TIMER
To start the heater at once, turn the knob to anywhere between 1-4 on the operating time
scale. The heater will start and remain on for the time selected.

Heating of the sauna

CAUTION!
Smoke and odor formation when heating up for the first time
Work materials from the manufacturing process will be present on the new heating elements.
These evaporate when the sauna heater is heated up for the first time. This produces smoke
and an unpleasant odor. Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when operating the sauna heater for the first time and if the
heating elements for the sauna heater have been changed. In this way you will prevent
damage to health due to the fumes and smoke produced when heating up for the first time.
1. Select the highest possible temperature in the sauna control.
2. Heat up the sauna heater for half an hour. Do NOT stay in the sauna cabin during this
period.
3. Allow the sauna cabin to ventilate thoroughly after heating up for the first time.
4. If no smoke or odor is produced the next time the sauna heater is heated up, you can
start to use the sauna. If smoke or odor is produced again, leave the sauna cabin
immediately and repeat the initial heating up process followed by ventilation.
Always check the sauna room before switching sauna heater on (to be sure that there is no
combustible things within the safety distances of the heater or on the heater). Make sure
that sauna room has been efficiently ventilated. If the output of the heater is proper it will
take about an hour to reach suitable temperature. The temperature in sauna room
should be between +60 - + 90 °C, according to the preference of user. Too powerful heater
will heat sauna room too quickly and the stones won't have enough time to warm. The
water poured on the stones will not evaporate, but flow into the stone holder. An
underpowered heater, on the other hand, would lead to an undesirably long heating period.
ENGLISH