Control Settings; Thermostat; Timer - Sawotec 3P-1P Bedienungsanleitung

Control Settings

THERMOSTAT

Adjust the temperature of the sauna by simply turning the operating knob.
Thermostat support automatically the choosen temperature.
In case the heater overheats, the safety sensor will automatically stop the
heater even if the timer is on. Find out for what reason the heater
overheated. The reason for this could be too tightly or too loosely placed
sauna stones, heater´s location or inappropriate ventilation. Exposure of the
sensor to the glowing heating element may cause sensor to overheat. Find
out the reason for overheating and fix the problem before resetting the
safety sensor. The reset button is located below the temperature knob. Refer
to Fig. 4.

TIMER

To start the heater at once, turn the knob to anywhere between 1-4 on the
operating time scale. The heater will start and remain on for the time
selected.
15
ENGLISH