2000 Cycle Alarm Setting - Rademacher Rp-Sx5-900N-3 Bedienungsanleitung

Automatic closing time setting
4. Press „+" and select
the required closing
time:
1 = 30 sec. 5 = 150 sec.
2 = 60 sec.
6 = 180 sec.
3 = 90 sec. 7 = 210 sec.
4 = 120 sec. 8 = 240 sec
(maximum)

2000 cycle alarm setting

After a period of time in use, regularly check to
see whether the door is level when opening/
closing, and whether the spring has enough
force to raise the door.
Add a suitable amount of lubricant to all moving
parts regularly.
1. Press „+".
(press several times if
necessary) until „7" is
displayed.
4. Press „P" in order to store the
setting.
5. Press „P" in order
to store the setting.
2. Press „P", the display
is „0".
(0 = o = factory setting)
5. Conclude programming (refer to page 66, method 2)
or proceed with next setting.
6. Conclude programming
(refer to page 66, me-
thod 2) or proceed with
the next setting.
NOTE
If this function is activated, after 2000 cycles the
door opener will indicate with a short whistling tone
at regular intervals that door maintenance must be
carried out.
To end the alarm tone
Switch the power supply o and then on again, or press
the „P" button for the door for 5 seconds.
3. Press „+", the display
is „1".
(1 = on)
EN
63