IKEA DAGLIG Handbuch Seite 7

ENGLISH
Switching the oval zone on and off
Switch the oval zone by touching
seconds. Repeat the procedure to switch off
the outside ring.
Before an outside oval can be switched
on, the inside ring must be switched on.
Switching the outside rings on and off
Switch on the inside ring before you switch
on the outside rings by touching
seconds. For more outer rings touch the
same sensor field again. The subsequent in-
dicator comes on. Repeat the procedure to
switch off the outside rings.
Using the Timer
Touch repeatedly until the pilot light of a
desired cooking zone displays. For exam-
ple, for the front left zone.
Touch or of the Timer to set the time
00 99
between and
lot light flashes more slowly, the time counts
down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears,
es, and cooking zone switches off. If cooking
zone is not in use and the time set has
elapsed acoustic signal appears and
flashes.
1-2
for 1-2
minutes. When the pi-
00
flash-
00
Select for a cooking zone to switch off
the function, and the pilot light of the cook-
ing zone selected flashes faster. Touch
and the remaining time counts backwards
00
to . The pilot light goes out.
STOP+GO
The Stop+Go function sets all cooking zones
that operate to the lowest heat setting (
).
When Stop+Go operates, you cannot
change the heat setting.
The Stop+Go function does not stop the tim-
er function.
• To activate this function touch
symbol comes on.
• To deactivate this function touch
heat setting that you set before comes on.
Lock
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
ting that you set before comes on.
When you stop the appliance, you also stop
this function.
The child safety device
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
To deactivate the child safety device
• Activate the appliance with
set the heat settings. Touch
onds. The symbol
• Deactivate the appliance with
7
. The
. The
. It pre-
. The symbol
. The heat set-
. Do not
.
. Do not
for 4 sec-
comes on.
.