Installation; Inspecting The Shipment; Unpacking The Ups System - Online USV XS6000 Benutzerhandbuch

I N S T A L L A T I O N
3.

Installation

3.1

Inspecting the shipment

Keep the shipping cartons and the packaging material for the ship-
ping company or the sales agency. If parts of the system were dam-
aged during transport, please submit a transport damage claim to
your supplier within 24 hours. Should you discover damage after ac-
cepting the equipment, please claim this as hidden damage.
3.2

Unpacking the UPS system


If the UPS system is unpackaged at low ambient tempera-
tures, condensation may form on the outside and inside of
the housing. Install the UPS system only when the inside and
outside are completely dry (risk of an electric shock)

The UPS system is heavy (see Technical Data). At least two
persons are required for lifting out of the packaging and for
the installation
Move and open the packaged UPS system carefully. Leave
the components in the packaging until these are installed.
To unpack the housing and the accessories:
1. Open the outer carton, remove the foam pieces and take out
the accessory parts.
2. Carefully lift the UPS system out of the outer carton. Two peo-
ple are required for this. For the XANTO S 10000, please use
the handles on the inner carton (see Figure 3).
XS6000+XS10000_manual_ger_eng_it_V1.1.2.doc
CAUTION
NOTE
82 / 216
R. Kistler