Programmes; Settings - ZANKER KDT 10032FK Benutzerinformation

Programmes

Programme
2)
3)
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes
can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with nor-
mal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to
come out from the appliance. Do not use detergent with this programme.

Settings

Programme selection mode
The appliance is in programme selection mode when only the indicator of the programme
When the appliance is in programme selection mode, it is possible to set a programme and to enter the user mode.
If the control panel does not show this condition, do the RESET function.
Degree of soil Programme phases
Type of load
•
Normal soil
•
Crockery and cut-
•
lery
•
•
Normal soil
•
Crockery and cut-
•
lery
•
•
Heavy soil
•
Crockery, cutlery,
•
pots and pans
•
Fresh soil •
•
Crockery and cut-
lery
All •
Duration
(min)
Prewash
225
Wash 50 °C
Rinses
Dry
Prewash
150
Wash 65 °C
Rinses
Dry
Prewash
144 - 154
Wash 70 °C
Rinses
Dry
Wash 60 °C 30
Rinse
Prewash 14
Consumption values
1)
Energy
(kWh)
0.932 10.2
1.4 14
1.3 - 1.5 12.5 - 14.5
0.9 10
0.1 4
is on.
Water
(l)
5