Technical Information; Rating Plate; Environment Concerns - ZANKER KDT 10032FK Benutzerinformation

Problem
There are stains and dry water drops
on glasses and dishes.
The dishes are wet.
Refer to "Hints and tips" for other
possible causes.

Technical information

Dimensions
Electrical connection 1)
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to
decrease energy consumption.

Rating Plate

ENVIRONMENT CONCERNS

Recycle the materials with the symbol
packaging in applicable containers to recycle it. Help
• The released quantity of rinse aid is not sufficient. Adjust the rinse aid
selector to a higher position.
• The quality of the rinse aid can be the cause.
• The programme does not have a drying phase or has a drying phase
with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a different brand
or activate the rinse aid dispenser and use rinse aid and multi-tablets
together.
Width / height / depth (mm)
Voltage (V)
Frequency (Hz)
Min. / max. bar (MPa)
Cold water or hot water 2)
Place settings
Left-on mode (W)
Off-mode (W)
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
. Put the
Possible solution
596 / 818-898 / 550
220 - 240
50
0.5 (0.05) / 8 (0.8)
max 60 °C
13
0.99
0.10
Information for test institutes
For all the necessary information for test performance,
send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the
rating plate.
protect the environment and human health and to
recycle waste of electrical and electronic appliances. Do
15