Network; Device Info - T+A PA 3100 HV Betriebsanleitung

Network

menu item
MAC
sub point
IP
sub point
Subnet mask
sub point

Device Info

menu item
Main
sub point
BL (Bootloader)
sub point
Factory settings
sub point
Here the LAN port can be configured for analysis purposes (diagnosis) and
computer-controlled operation of device functions (home automation systems
such as CRESTRON, AMX, etc.).

Normally no change is required to the settings. You only need to enter the
appropriate IP address and subnet mask here if the device is to be connected to a
local computer network.
At this point the machine's MAC address is displayed. The MAC address is
assigned individually for each device. For this reason it is not possible to enter
any values at this point.
Here you can enter the device's IP address.
The address range of the connected network can be entered at this menu point.
At this menu point you will find information regarding the state of the installed
software and factory reset.
Display of control software version
Display of bootloader version
Calling up and confirming this menu point erases all personal settings, and
restores the factory default settings.
55