First Ring - SAGEMCOM D18V Bedienungsanleitung

4. You will hear a confirmation tone: the settings of your phone are restored to their initial
values.
9.6.
Prefix ( Depending on Country)
If a PABX is used in a private network, you can program the outside call prefix.
This function sets:
- the PABX prefix number: this number will be added at the beginning of the
number you dialled.
- the number to be detected: if the number you dialled starts with the recorded
sequence, this sequence will be automatically deleted.
These two settings are not applied if number you dialled starts with "#" or "*".
1. Press . Select "advanced set" using the
2. Using the or
3. Select "detect digit" to define the number giving you access to the outside line.
4. Select "prefix" to specify the «digits before prefix».
5. Press key to confirm your selection. You will hear a confirmation tone.
9.7.
Flash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign
country, you may need to modify the flash duration in order to use your telephone correctly with
regard to the following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Press . Select "advanced set" using the
2. Using the or
3. Three choices are available: " short ", " medium " and " long ".
4. Select the appropriate time period.
5. Press key to confirm your selection. You will hear a confirmation tone.
9.8.
Modifying the dialing mode (Depending on Country)
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling
mode. To select a dialling mode, follow this procedure:
1. Press . Select "advanced set" using the
2. Using the or
Two modes are available: "tone" et "pulse".
Press key to confirm your selection. You will hear a confirmation tone
9.9.

First ring

Activating this function is only useful if your line does not have the CLIP service.
This menu allows you to arrange your telephone to ring when a call is received even if it is
connected on the same line with another device (a fax, a cord telephone, etc.).
This function is activated by default. It will be automatically deactivated when a CLIP call is
received (the number of which will be displayed on the handset screen).
key, select "auto prefix". Press
key, select "recall time". Press
key, select "dial mode". Press
- 16 -
or key, press .
.
or key, press .
.
or key, press .
.
English