Alarm Clock; Advanced Settings - SAGEMCOM D18V Bedienungsanleitung

8.3.

Alarm clock

To set the date and time:
1. Press , select "clock&alarm" using the
2. Using the
3. To activate the alarm once, select "on once ".
4. To repeat the alarm each day at the programmed time, select "on daily ".
5. To deactivate the alarm, select "off ".
6. Select your choice then press
Use the touch tone pad to enter the current alarm time. Enter minutes first (format
is HH:MM).
(If, after entering the time, the time format is 12H, use the
to set pM).
7. Press key to confirm your selection. You will hear a confirmation tone.
8.4.
Modifying alarm tone
1. Press
2. Using the
3 melodies are available: "melody 1", "melody 2" and " melody 3".
3. Select the desired melody.
4. Press
9.

Advanced settings

9.1.
Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions.
This code can include 8 digits.
1. Press
2. "change pin " appears on the screen. Press
The base station code entry screen is displayed.
3. Enter your old code first. Each time a digit is entered the «_» is replaced by a «*».
Press
4. Enter your new PIN code. Each time a digit is entered the «_» is replaced by a «*».
5. Press
Note!
Carefully note your base station code. You will need it to change certain settings.
9.2.
Association handset & base
This function allows you to register a new handset on your base.
1. Press . Select "advanced set" using the
or key, select "alarm". Press
:
, select "clock&alarm" using the
or key, select "alarm tone". Press
key to confirm your selection. You will hear a confirmation tone.
.Select "advanced set" using the
to confirm.
key to confirm your selection. You will hear a confirmation tone.
or key, Press
.
or key, Press
.
or key, press
.
or key, press
- 14 -
English
.
key to set aM and the
.
.
.
key