Installing The Appliance - AEG SANTO K 7 10 43-7i Benutzerhandbuch

Installing the appliance

CAUTION!
Make sure that the mains cable can move freely.
Do the following steps:
1. Apply the adhesive sealing strip to the
appliance as shown in figure.
2. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge.
69
Installation
2
1