Ventilation Requirements; Installing The Appliance - AEG AIK3022R Benutzerinformation

72 www.aeg.com

7.4 Ventilation requirements

5 cm

7.5 Installing the appliance

CAUTION!
Make sure that the mains cable
can move freely.
min.
200 cm
2
x
On the opposite side:
1. Tighten the lower pin.
2.
Install the spacer.
3. Install the door.
4. Tighten the upper pin.
The airflow behind the appliance must
be sufficient.
min.
200 cm
2
Do the following steps:
If necessary cut the adhesive sealing strip
and then apply it to the appliance as
shown in figure.
x