AEG SANTO K 7 10 43-7i Benutzerhandbuch Seite 72

72
Installation
9. Push the part (Hc) on the part (Ha).
10. Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and the
furniture door and mark the holes.
11. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
Ha
Hc
8 mm
Hb
8 mm
K
Ha
Ha