Ventilation Requirements; Installing The Appliance - AEG SCS41800S0 Benutzerinformation

34 www.aeg.com

7.4 Ventilation requirements

5 cm

7.5 Installing the appliance

CAUTION!
Make sure that the mains cable
can move freely.
min.
200 cm
2
x
• Loosen and remove the lower pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
The airflow behind the appliance must
be sufficient.
min.
200 cm
2
Do the following steps:
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
x