Dmx-Protocol - EuroLite LED KLS-801 Bedienungsanleitung

Set the desired address via the UP or DOWN buttons.
Controlling:
After having addressed the LED FE-Bar RGBAW, you may now start operating it via your lighting controller.
Note:
It' s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.

DMX-protocol

Channel 1/2/3/4 Color for Flower 1/2/3/4
000-007 all off
008-015 red
016-023 green
024-031 blue
032-039 white
040-047 amber
048-055 red & green
056-063 red & blue
064-071 red & white
072-079 red & amber
080-087 green & blue
088-095 green & white
096-103 green & amber
104-111 blue & white
112-119 blue & amber
120-127 white & amber
128-135 red & green & blue
136-143 red & green & white
144-151 red & green & amber
152-159 red & white & amber
160-167 red & white & blue
168-175 red & amber & blue
176-183 green & blue & white
184-191 green & blue & amber
192-199 blue & white & amber
200-207 red & green & blue & white
208-215 red & green & blue & amber
216-223 green & blue & white & amber
224-231 blue & white & amber & red
232-239 white & amber & red & green
240-247 amber & red & green & blue
248-255 all 5 colors on
Channel 5 Strobe
000-010 Neutral
011-128 Flash from slow to fast
129-255 random strobe from slow to fast
Channel 6 Motor
000-010 Motor off
011-0255 Motor rotate
Channel 7 Program
000-010 Neutral
20/22
00062412.DOC, Version 1.0