Herunterladen Diese Seite drucken

Operation; Stand Alone-Mode; Sound Control; Automatic - EuroLite LED KLS-801 Bedienungsanleitung

Werbung

OPERATION

After you connected the spot to the mains, the EUROLITE LED FE-Bar RGBAW starts running.
The LC display lights up and you can choose the desired mode via the buttons MODE, UP and DOWN.
The device has two operating modes. It can be operated in Stand Alone or in DMX-controlled mode.

- STAND ALONE-MODE

Sound Control

Automatic

Remote control via RC-2 controller

- DMX MODE

STAND ALONE-MODE
Sound Control
To choose Sound Control Mode, press the MODE button.
When the display shows SND, the device is in sound controlled mode.
You can do without a controller as the device features a built-in microphone, which provides automatic sound
control. You can adjust the sensitivity with the rotary-control on the rearpanel.
Automatic
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. In Auto
Mode the chasers are called up automatically in a continuous loop.
To choose Auto Mode, press the MODE button. When the display shows AUTO, the device is in auto mode.
The desired speed values can be selected via the UP or DOWN buttons. (from 001 = very fast to 100 = very
slow).
Remote control via RC-2 controller
After connection, the device switches into sound control mode, irrespective of what is shown on the LC
display.
1. Press the SPEED-button in order to adjust the desired reaction time for sound control:
- When the corresponding LED flashes, it is in fast mode
- When the corresponding LED is permanently on, it is in mid mode
- When the corresponding LED stays off, it is in slow mode
2. Press the PROGRAMS/STROBE-button in order to change the patterns of the internal programs.
The Strobe function is not available.
3. Press the BLACKOUT-button, in order to set Blackout.
The corresponding LED is permanently on in Blackout mode.
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED FE-Bar RGBAW will respond to the controller.
Addressing
Press the MODE button until the display shows 512.
19/22
00062412.DOC, Version 1.0

Werbung

loading