Glossary - Mennekes Start (E) Betriebsanleitung

8 Appendix
8.1 Accesories
Part number Description
On request Channel adapter for cable ducts
36113 Charging cable Mode 3, 32 A,
3P+N+PE
320011 Test box
8.2

Glossary

Term
CP
CPX communication box
RCCB
CB
Mode 3 (IEC 61851)
PP
PWM
15
Explanation
Control pilot
Designation of the plugs and
sockets contacts / line, over
which the information is
communicated.
MENNEKES designation of
the PWM module or
charging controller.
Residual current circuit
breaker
Type A = sensitive to pulse
currents, type B = sensitive
to universal currents.
Circuit breaker
Charging mode for vehicles
with a type 2
communication interface on
the charging socket.
Proximity Pilot or Plug
Present
Contact for determining the
current load capacity of the
charging cable and
activating the immobiliser.
Pulse-width modulation
Transmission type of data
communication.
Term
PWM module
Type 2 (IEC 62196-2)
Resistance coding
Explanation
Element of the charging
station (in mode 3 charging)
for communicating with the
vehicle.
Single- and three-phase
charging couplers with
identical plug geometry for
charging powers from 3.7 to
44 kW AC.
The charging cables feature
resistance coding that is
analysed by the charging
system.
The resistance value defines
the maximum allowable
current of the charging
cable.
The charging system will
reject cables with insufficient
current load capacity.