Assembly; Exterior View - Mennekes Start (E) Betriebsanleitung

3.5

Assembly

3.5.1 Exterior view

Fig. 4: Front view (example)
1 Rear enclosure part
2 Front enclosure part
3 Window for counter 1)
4 Front panel
5 Fastening screws for front
enclosure part
1) Only for versions Pro and Basic.
6 Predetermined breaking
point for supply line /
cable duct from below
Fig. 5: Rear view (example)
1 Rear enclosure part
2 Fastening screws for front
enclosure part
3 Air outlet
The enclosure of the charging station has three parts and
consists of rear enclosure part, front enclosure part and the
front panel. The front panel has to be folded down to access
the internal components. The design of the front panel
depends on the version of the charging station.
 See Chapter "Front panel" on page 7.
4 Opening for cable duct
5 Fastening holes
6 Cable glands
6