Symbols And Icons; Symbols On The Device - FLORABEST FBM 450 B2 Originalbetriebsanleitung

GB IE NI
Engine .............. 4-str oke B&S 450 E Series
Engine size .......................... 125 cm
Power input ................ 1.82 kW (2,47 HP)
Blade rotation speed (n
Blade torque ................................. 45 Nm
Petrol tank volume ............................ 0.8 l
Octane rating ................................ 95-98
Engine oil tank volume ...................... 0.5 l
Spark plug ................ Champion QC12YC
Cutting circle ........................... ø 420 mm
Cutting height... 5-stage, 25-34-46-60-75 mm
Grass collection box volume ............... 55 l
Weight (inc. collection box) ........... 25.2 kg
Sound pressure level
(L ) ................ 81.0 dB(A); K=3.0 dB(A)
PA
Sound power level (L
measured .......94.2 dB(A); K=1.79 dB(A)
guaranteed ............................. 96 dB(A)
Vibration at the handle
(a )............ 6,67/5,69 m/s
h
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer -
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
4
3
).. max. 2900 min
0
)
WA
; K=1.5 m/s
2
Warning:
The vibration emission value may
differ during actual use of the
(cc) power tool from the stated value de-
pending on the manner in which the
power tool is used.
-1
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).

Symbols and icons

Symbols on the device

Attention!
2
Read the instruction manual.
Risk of injury from parts being
Keep bystanders away from the
equipment.
Risk of injury from sharp blades.
Keep feet and hands away.
Caution – toxic fumes!
Do not operate the equipment in
enclosed areas.
Caut
Do not smoke and keep away from
heat sources.