Cleaning And Maintenance - EuroLite LED TMH-50 Moving-Head Wash Bedienungsanleitung

DMX mode
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
Stand alone mode (Master)
Automatic program mode
With the function "Perform mode" you can run the internal programs. You have the choice between a
fast (Quick) and a slow (Slow) internal program.
Sound control mode
The device features a built-in microphone, which provides automatic sound-control. With the function
"Sound Control" you can run the sound controlled mode. You have the choice between a sound
controlled color change (001) and a sound controlled strobe effect (000).
PAN Reverse
With this function you can reverse the PAN movement.
TILT Reverse
With this function you can reverse the TILT movement.
Factory Set
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded).
Reset Set
With this function you can reset the device.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
26/27 00065136.DOC, Version 1.0