Control Board; Factory Set - EuroLite LED TMH-50 Moving-Head Wash Bedienungsanleitung

Control-channel 9 - Switching the LEDs, Strobe, Reset
Decimal Hexad. Percentage S/F
0 10 00 0A 0% 4%
11 20 0B 14 4% 8%
21 30 15 1E 8% 12%
31 200 1F C8 12% 78%
201 250 C9 FA 79% 98%
251 255 FB FF 98% 100%
Control-channel 10 - Dimmer intensity
Decimal Hexad. Percentage S/F
0 255 00 FF 0% 100%
Control-channel 11 - PAN-movement with 16 Bit-resolution
Control-channel 12 - TILT-movement with 16 Bit-resolution

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing the Mode/Esc-button. You can change the selection by pressing Up
or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing the
Mode/Esc-button. The functions provided are described in the following sections.
Default settings shaded.
Mode
DMX512
Address
Mode Code
Perfom
Stand-
Mode
alone
Sound
control
PAN Reverse
TILT Reverse

Factory Set

Reset Set
S LED off
S Neutral
S Reset
F Strobe-effect with increasing speed
F Random strobe-effect with increasing speed
S Neutral
F Gradual adjustment of the dimmer intensity from 0 to 100 %
Display
001 -512
Quick/Slow
000/001
000/001
000/001
000/001
000/001
25/27
Feature
Feature
Function
DMX address setting
Auto - internal programs
- the device is defined as master
Sound-control mode
- the device is defined as master
Reverse PAN movement
Reverse TILT movement
Restore factory settings
Reset
00065136.DOC, Version 1.0