Control Board - EuroLite TMH XB-200 Bedienungsanleitung

Control Board

The Control Board offers several features: you can easily set the starting address, switch on and off the lamp
or make a reset.
The main menu is accessed by pressing the encoder until the display is lit. Browse through the menu by
turning the encoder. Press the encoder in order to select the desired menu. You can change the selection by
turning the encoder. Press the encoder in order to confirm. To return to the home screen select "Exit" in the
main menu.
The functions provided are described in the following sections.
Main Menu Submenu
DMX
X Reverse
Y Reverse
Lamp on
Setup
Language
Backlight
Screen Ro
Exit
Gobo
Color
Focus
Adjust Prism
X
Y
Exit
Auto run
Sound run
Run Test
Soft Reset
Exit
Display Function description
DMX address setting
001-512 With this function you can adjust the desired
DMX-address via the Control Board.
PAN Reverse
ON/OFF With this function you can reverse the PAN-
movement.
TILT Reverse
ON/OFF With this function you can reverse the TILT-
movement.
Lamp on or off
With this function you can switch the lamp on
ON/OFF or off via the Control Board. Select "ON" if
you wish to strike the lamp or "OFF" in order
to switch it off.
Language select
En/Zh With this function you can select the desired
display language.
Display intensity
With this function you can adjust the display
001-255
intensity from 1 to 100 % (001-255 increasing
intensity).
Display Reverse
With this function you can flip the display by
ON/OFF
180° (ON) for a better view when the fixture is
hung from the truss or a ceiling.
Return to the main menu
001-255
001-255
Calibration
With this function you can calibrate Gobo/
001-255
Color wheel, Focus, Prism and the PAN and
001-255
TILT movement to their correct starting
positions.
001-255
001-255
Return to the main menu
Auto program (Master mode)
ON/OFF With this function you can run the internal
program.
Sound controlled internal program (Master
mode)
ON/OFF
With this function you can run the internal
program sound-controlled.
Reset
ON/OFF With this function you can reset the device via
the Control Board
Return to the main menu
35/38 00094283.DOC, Version 1.0