Text Programming; Clerk Names; Logo Messages - Sharp XE-A203 Bedienungsanleitung

8

Text Programming

Please refer to "Guidance for text programming" on page 13 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
start programming with the
Then a little after displaying guidance message indicating what programming you are in, the register may ask
you to enter the first parameter. Referring to the corresponding "Procedure", enter a parameter and start
character entries.

Clerk names

(12 digits)
s 5 P
Key operation example
s

Logo messages

The register can print programmed messages on every receipt. On the standard model, a 6-line logo message is
printed on the receipt. If you want to print in other logo message format, please change the format. For the
programming details, refer to page 66. The options are listed below:
s 4 P
* "Header 3-line message" type: 1 to 3
"Header 6-line message" type: 1 to 6
"Header 3-line and footer 3-line message" type: 1 to 6 (1 to 3 as header, 4 to 6 as footer)
s
key, the cash register will automatically be ready for text entry.
Clerk no.
(1-25)
To program another clerk
Operator display
P
5 CLERK NAME PROG.
ENTER CLERK NO.
@
_
1
DAVID DAVID_
s
CLERK NAME PROG.
ENTER CLERK NO.
A
(6 lines and 24 digits for each line)
*Line number
(1-6)
1
QUICK START GUIDE
Part
To keep current setting
@
Character keys
(max. 12 digits)
0.00
To keep the current setting
@ Character keys
(max. 24 digits)
To program another line
2
Part
P
key for text entry just after you
s A
Print
s A
3
Part
23