Herunterladen Inhalt Inhalt Diese Seite drucken

Sharp XE-A203 Bedienungsanleitung Seite 55

Elektronische registrierkasse
Vorschau ausblenden Andere Handbücher für XE-A203:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 93
2. Text programming (Press
:
(1) Press
key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Footer print on receipt programming (Press
(1) Go to (2) when the footer print on receipt does not
need to be changed from "NO". Otherwise, press
:
key to display "YES".
:
Each time
key is pressed, the display shows
"YES" and "NO" alternatively.
Default setting is "NO".
This programming decides whether or not the
machine should print a message at the foot of a
receipt when a specified key is used. With regard
to programming method of footer logo message,
refer to "Logo messages" section on page 23.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
4. Entry of amount tendered programming (Press
(1) Go to (2) when the entry of amount tendered does
not need to be changed from "NON
COMPULSORY". Otherwise, press
display "COMPULSORY".
:
Each time
key is pressed, the display shows
"COMPULSORY" and "NON COMPULSORY"
alternatively. In case of
"INHIBIT" is displayed instead of "NON
COMPULSORY".
Default setting is "NON COMPULSORY" or "INHIBIT".
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
s
to skip. / Press
@
and
key moves the cursor to
key to register the text.
key to register the setting.
:
key to
c
b
and
programming,
key to register the setting.
1
2
3
Part
Part
Part
A
to terminate.)
CHEQUE
s
s
to skip. / Press
s
s
to skip. / Press
s
FOR THE MANAGER
:
ENTER TEXT
CHECK1
CHEQUE
FOOTER PRINT
A
to terminate.)
AMOUNT TENDERED
NON COMPULSORY
A
to terminate.)
LIMIT DIGITS
NO
8
53

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis