Sharp XE-A203 Bedienungsanleitung Seite 20

5. VAT/tax 1 status programming (Press
(1) Go to (2) when the VAT/tax 1 status does not need
to be changed from "TAX1 YES". Otherwise, press
:
key to display "TAX1 NO".
:
Each time
"TAX1 NO" and "TAX1 YES" alternatively.
Choose "YES" for taxable and "NO" for non-taxable.
Default setting is "YES" for dept. code 1 to 10 and
21 to 99, and "NO" for dept. code 11 to 20.
When any entry of a taxable department is made in
a transaction, tax is automatically computed
according to the associated tax rate as soon as the
transaction is completed.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
6. VAT/tax2 status programming (Press
(1) Go to (2) when the VAT/tax 2 status does not need
to be changed from "TAX2 NO". Otherwise, press
:
key to display "TAX2 YES".
:
Each time
"TAX2 YES" and "TAX2 NO" alternatively.
Default setting is "NO" for dept. code 1 to 10 and 21
to 99, and "YES" for dept. code 11 to 20.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
7. VAT/tax3 status programming (Press
(1) Go to (2) when the VAT/tax 3 status does not need
to be changed from "TAX3 NO". Otherwise, press
:
key to display "TAX3 YES".
:
Each time
"TAX3 YES" and "TAX3 NO" alternatively.
Default setting is "NO".
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
18
key is pressed, the display shows
key to register the setting.
key is pressed, the display shows
key to register the setting.
key is pressed, the display shows
key to register the setting.
s
to skip. / Press
s
to skip. / Press
s
to skip. / Press
A
to terminate.)
s
SELECT OF TAX2
TAX2
A
to terminate.)
s
SELECT OF TAX3
TAX3
A
to terminate.)
s
SELECT OF TAX4
TAX4
NO
NO
NO