Department Programming - Sharp XE-A203 Bedienungsanleitung

• The lowest taxable amount is valid only when you select add on tax system. If you select VAT
(Value added system), it is ignored.
• If you make an incorrect entry before pressing the third
it with the
• You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do
need to enter the decimal for fractions.
• If you select VAT system, the sign which you program is ignored.
To delete a tax rate, use the following sequence:
s
6

Department Programming

Merchandise can be classified into a maximum of 99 departments. Items sold using the department keys can
later be printed on a report shown as the quantities sold and sales amounts classified by department. The data
is useful for making purchasing decisions and other store operations.
Default setting for the VAT/tax statuses and signs are listed below.
Dept. code:
Dept. 1-10
Dept. 11-20
Dept. 21
Dept. 22-99
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
• When pressing the
the data you entered before pressing the
• When pressing the PLU,
procedure except while entering texts or prices, the programming will move to the pressed key
programming.
1. Specify the department code.
(1) For dept.1 through 16, press the department key.
For dept.17 through 32, press the
press the department key.
Or enter dept. code using numeric key, and then
d
press the
Immediately after displaying the current text data and
the corresponding dept. key code you entered,
guidance message for the next step will be displayed.
16
l
key.
9 @
VAT/tax status:
VAT 1
VAT 2
VAT 1
VAT 1
A
key in the middle of procedure, the programming will terminate and the
l
key twice in the middle of procedure, the programming will terminate and
-
,
D
key.
Tax number (1 to 4)
A
is saved.
l
key twice is NOT saved.
% & V r R
, , , ,
Key operation
key, and then
@
key in programming a tax rate, cancel
@ v
Sign:
(+)
(+)
(-)
(+)
s
key when the corresponding
X Y c b
, , , or key in the middle of
+
DEPT.06
ENTER[00]KEY
A
Operator display
06