Text Programming - Sharp XE-A301 Bedienungsanleitung

Text Programming

4
The register allows you to program text for clerk names, department item names, PLU/subdepartment item
names, if necessary. There are two ways for programming text: using character keys on the keyboard or
entering character codes with numeric keys on the keyboard.
Using character keys on the keyboard
You can enter characters according to the small figures printed in the lower right position of the tops. For the
layout, please refer to "Keyboard" section on page 5.
The following are used as control keys for character entry:
H
Toggles between upper-case and lower-case letters. By default, the upper-case letter is selected.
H
Once the key is pressed, you are locked in for entering lower-case letters. "a" is displayed when
lower-case letters entry is selected as shown in the operator display example below.
N N
Press the
key. If you press the
entry mode. Once the
displayed when numeric characters entry is selected as shown in the operator display example below.
W
Toggles between single-size and double-size characters. By default, the single-size character is
selected. Once the
displayed when double-size characters entry is selected as shown in the operator display example
below.
B
Backs up the cursor, erasing the character to the left.
Operator display (Example)
To program the word "Clerk01" with the letter "C" being double size.
To make the letter "C" double size character
To make character size return to normal size
To toggle the characters to lower-case letters
To enter numbers
key to enter numeric characters. For example to enter "1", press the
1
key without pressing the
N
key is pressed, you are locked in for entering numeric characters. "1" is
W
key is pressed, you are locked in for entering double size characters. "W" is
Cursor
ABCD
01
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered using character keys is displayed here.
N
key, the cash register goes to character codes
PGM
Wa1 04
Number of characters programmed
W g
W
H
h i j k
N 0 1
N 1
and
=C PGM
01 W 02
=C PGM
01 02
=C PGM
01 a 02
=Clerk PGM
01 a 06
=Clerk01 PGM
01 a1 08
35