Sharp XE-A203 Bedienungsanleitung Seite 66

Rounding amount printing (A)
Total amount rounding when a transaction is finalized directly by
• When you live in Australia, set as shown on the tale below for the parameters A and B.
Rounding up of the unit digit of amount (C)
Rounding down of the unit digit of amount (D)
• Handle C and D as a pair. When you live in Australia, Switzerland, Norway or South Africa, set as shown on
the table below for the parameters C and D.
The rounding is performed as follows:
In case C = 0: Unit digit of amount < or = Value of D — rounding down
Value of D < or = Unit digit of amount — rounding to 5
In other cases: Unit digit of amount < or = Value of D — rounding down
Value of D < Unit digit of amount < Value of C — rounding to 5
Value of C < or = Unit digit of amount — rounding up
Application of rounding (E)
Limit of the least significant digit in entering amount of item (F)
Memory of difference due to rounding (G)
Limit of the least significant digit in entering amount of payment (H)
• When you live in Australia, Switzerland, Norway or South Africa, set as shown on the table below for the
parameters E through H.
Switzerland
Norway
South Africa
A
Australia Yes
* Applied to payment by cash and change amount.
Job code: 68
* Item:
A Always enter 0.
B Always enter 0.
C Temporary EJ printing during a transaction Disable
D EJ printing and clearing EJ data when
issuing general Z1 report
E PGM mode operation records type
F REG/MGR/VOID modes operation
records type
G Compressing printing for EJ data
H Action when EJ memory area is full
64
CD E
82 Item & payment
54 Payment
05 Payment
B CD
Not rounding 82
X
F
0 and 5 only
Arbitrary
Arbitrary
E F
Payment* Arbitrary
Selection:
Enable*
No*
Yes
Details*
Header information only
Details*
Total
No (normal size)
Yes (small size)*
Continue
Continue and warning (near full warning)* 1
Lock and warning (with near full warning) 2
Y c b
, , key(B)
or
G H
No 0 and 5 only
Yes 0 only
Yes 0 and 5 only
G H
Yes 0 and 5 only
Entry:
0
0
0
1
0
1
0
1
0
1
0
1
0