Adjusting The Volume; Usb Port; Factory Default Values; Multi-Room Functionality - Silvercrest SMRS 30 A1 Bedienungsanleitung

SilverCrest SMRS 30 A1

Next, connect the other end of the audio cable (C) to the AUX IN jack (10) of your speaker.

Start playback on the external audio source.

Select the AUX IN source from the SilverCrest Smart-Audio app or by pressing the Mode /
Spotify button (2).

If necessary, you can set the desired volume with the volume adjustment buttons (4, 5), via the
SilverCrest Smart-Audio app or on your external audio source.

Adjusting the volume

You can adjust the volume by using the SilverCrest Smart-Audio app or by pressing the + (5) or -
(4) buttons on the speaker.

USB port

On the one hand, the USB port can be used to connect a USB storage device to play the saved
music files in "Music player" mode. On the other hand, you can charge a device (smartphone or
tablet PC) connected to this port. Please note that the speaker has to be switched on in order to
charge a device connected to its USB port. The USB port is off while in standby mode.

Factory default values

Proceed as follows to restore the factory default values:
Press and hold the WPS / RESET button for approx. 5 seconds. The device will restart. After a brief
initialisation period (yellow and blue LEDs on simultaneously, then one LED briefly lights up green)
only the blue LED flashes slowly and the device is in AP mode.
Please note that all custom settings will be lost when restoring the factory default
values.
Restore the factory default values before passing on the device so that your data are
not revealed to any third parties!

Multi-room functionality

A multi-room system is very versatile. If you have multiple Wi-Fi speakers, you can group them by
using the SilverCrest Smart-Audio app. For example, you can install one speaker per room, group
them and then use your smartphone or tablet PC for centralised control. For instance, if you select a
radio station, it will be played on all grouped speakers.
Of course, you can ungroup the devices at any time and then control each speaker individually.
Or you can create multiple small groups for individual control.

Cleaning

Switch the device off and unplug the power adapter from the mains. To clean it, use a soft, dry
cloth. Never use any solvents or cleaners and never an abrasive sponge. Otherwise the speaker
housing can be damaged.
20 - English