Adjusting The Volume; Selecting The Mode; Bluetooth ® Mode - Silvercrest SBL 3 D1 Bedienungsanleitung Und Sicherheitshinweise

Press and hold the
speaker off. A sequence of beeps can be heard and the display (2) reads
"OFF".

9.2 Adjusting the volume

Briefly press the I◂◂ (8) or ▸▸I (4) buttons to adjust the volume to the
desired level. The current volume setting is shown on the display (2). A
beep sounds when the minimum or maximum volume is reached. The
speaker will always switch on at the volume it was at when it was switched
off.

9.3 Selecting the mode

Press the M button (9) several times to toggle through the different modes.
The current mode is shown on the display (2). The following modes are
available: (Bluetooth
9.4 Bluetooth
®
Via Bluetooth
as a smartphone or MP3 player) with the speaker. After pairing, you can
play the music on the speaker and control basic player functions remotely
using the buttons on the speaker.
Proceed as follows to pair the speaker with your mobile phone or player:
button (1) for approx. 2 seconds to switch the
If no button is pressed for approx. 2 minutes, the display
(2) switches off.
®
), FM (radio) and AL (alarm).
®
mode
, you can pair a Bluetooth
SilverCrest SBL 3 D1
®
-compatible music player (such
English - 49