Before First Use - IKEA Skinande Bedienungsanleitung

ENGLISH
– = rinse aid dispenser
activated.
– = rinse aid dispenser
deactivated.
3. Press
4. Press the on/off button to confirm the
setting.
Acoustic signals
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.
There is also an acoustic signal that
operates when the programme is
completed. By default, this acoustic signal is
on, but it is possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.

Before first use

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
to change the setting.
1. To enter the user mode, press and hold
simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
• The display shows the current setting:
– = Acoustic signal on.
– = Acoustic signal off.
3. Press to change the setting.
4. Press the on/off button to confirm the
setting.
When you start a programme,
the appliance can take up to 5
minutes to recharge the resin in
the water softener. It seems that
the appliance is not working. The
washing phase starts only after
this procedure is completed. The
procedure will be repeated
periodically.
The salt container
Caution! Only use salt
specifically designed for
dishwashers.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in the daily use.
and until
, , start to
and
continues to flash.
12
go