IKEA Skinande Bedienungsanleitung Seite 11

ENGLISH
German degrees
(°dH)
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
• The display shows the current setting:
e.g. = level 5.
3. Press repeatedly to change the
setting. Each time you press
number increases. After level 10 you will
start again from level by 1
4. Press the on/off button to confirm the
setting.
French degrees
(°fH)
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and until
, and
and
continues to flash
the level
mmol/l Clarke de-
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8
<0.7
Use of rinse aid and multi-tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
go
How to deactivate the rinse aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current setting.
Water softener level
grees
5 - 12
< 5
and
,
.
and
11
9
8
7
6
1)
5
4
3
2
2)
1
until
and
go off.
continues to