Memorize Chasers; Call Up Chasers; Run A Chaser; Sound-Control - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

Push the Master A-fader and the Fade Time-fader to maximum.
Push the channel-fader of the desired scene in Preset B to maximum.
The scene will be called up.

Memorize chasers

With the Scene Setter you can memorize up to 48 different scenes with 24 channels (Page 1 to Page 4).
Press the Mode Select-button, until the 1-48 Single/Preset Park-LED is lit.
Push the Master A-fader to maximum.
Push channel-faders to the desired setting.
Press the Record-button.
Push channel-faders to the desired setting for editing the next scene and press the Record-button.
Memorize as many scenes as desired or until the maximum (999 scenes) is reached.
Press and hold the Record-button and press the desired Flash-button in Preset B.
The scene is now memorized on this fader.

Call up chasers

Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader and the Fade Time-fader to maximum.
Push the channel-fader of the desired chaser in Preset B to maximum.
The chaser will be called up.

Run a chaser

Adjust the desired fade-time via the Fade-Fader.
Adjust the desired chaser-speed via the Speed-fader.

Sound-control

If the chaser is to be run sound-controlled, press the Audio-button and adjust the desired sensitivity via the
Audio-fader.
If the chaser is to be run exactly in the bass-beat, pull Speed-fader to minimum (the display shows "Sho")
and enter the bass-beats by pressing the Tap Sync-button repeatedly.
If the chaser is to be run step by step, pull Speed-fader to minimum (the display shows "Sho") and press the
Step-button repeatedly.

Memorize/edit chaser-speed

With the Scene Setter, you can run several chasers at a time in the Mix Chase-mode and define and
memorize an individual chaser-speed for every chaser.
Press the Audio-button, the LED turns off. Press the Park-button until the Mix Mode-LED is lit. Select the
desired chaser via the faders in Preset B. Adjust the desired speed via the Speed-fader or the Tap Sync-
buttons. Press and hold the Rec Speed-button and press the respective Flash-button in Preset B in order to
memorize the speed.

Delete a memorized chaser-speed

Press the Audio-button, the LED turns off. Press the Park-button until the Mix Mode-LED is lit. Set the
Speed-fader to minimum position (Show). Press and hold the Rec Speed-button and press the respective
Flash-button in Preset B in order to delete the memorized speed.

Switch the speed-range

The speed-range can be switched from 5 minutes to 10 minutes:
Press and hold the Record-button.
24/28 00020976.DOC, Version 1.5