Invert The Chaser-Direction; Delete A Step In A Chaser; Add A Step To A Chaser; Delete A Scene/Chaser - EuroLite DMX SCENE SETTER 24 Bedienungsanleitung

Press the Flash-button 10 in Preset A three times.
Release the Record-button.
The 10MIN-LED is lit and the right scale is activated.
The speed-range can be switched from 10 minutes to 5 minutes:
Press and hold the Record-button.
Press the Flash-button 5 in Preset A three times.
Release the Record-button.
The 5MIN-LED is lit and the left scale is activated.

Invert the chaser-direction

Press the Chase Rev-button.
The chaser-direction is inverted.

Delete a step in a chaser

Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader to maximum.
Hold the Edit-button and press the chaser's Flash-button in Preset B.
The chaser will be called up.
Pull the Speed-fader to minimum.
Press the Step-button in order to call up the desired step.
Press the Delete-button in order to delete the step.
Press and hold the Record-button and press the Rec Exit-button in order to leave the editing mode.

Add a step to a chaser

Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader to maximum.
Hold the Edit-button and press the chaser's Flash-button in Preset B.
The chaser will be called up.
Press the Mode Select-button, until the 1-48 Single/Preset Park-LED is lit.
Push the Master A-fader to maximum.
Push channel-faders to the desired setting.
Press the Record-button.
Push all channel-faders to minimum.
Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull the Speed-fader to minimum.
Press the Step-button in order to insert the step at the desired position.
Press the Insert-button in order to add the step.
Press and hold the Record-button and press the Rec Exit-button in order to leave the editing mode.

Delete a scene/chaser

Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Press and hold the Record-button and press the desired Flash-button in Preset B twice.
The scene/chaser is deleted.

Delete all scenes/chaser

Press and hold the Record-button.
Press the Flash-buttons 1, 4, 2, 3 in Preset A.
Release the Record-button.
All scenes/chaser are deleted.
25/28 00020976.DOC, Version 1.5