Prog-Sound Mode; Prog-Speed Mode; Memorize A Program; Adjust Fade Time - EuroLite FD-4 DMX-Controller Bedienungsanleitung

4. Press the Audio-button so that the spots react to the sound signal.
You can invert the chaser selection by pressing the Prog. <>-button.
This function is designed for entertainers and party rooms.

6.3 Prog-Sound Mode

Spots run sound-controlled through internal programs:
In this mode, all 4 freely programmable programs of the FD-4/8/12 can be run sound-controlled.
You can manually adjust the individual channels via the channel faders, the Masterfader and via the flash-
buttons.
1. Turn controller ON
2. Select the desired program(s) by pressing the respective Program-button(s).
3. Adjust Masterfader for total output.
4. Press the Audio-button so that the spots react to the sound signal.
You can invert the program selection by pressing the Prog. <>-button.
This function is designed for discotheques.

6.4 Prog-Speed Mode

Spots run speed-controlled through internal programs:
In this mode, all 4 freely programmable programs of the FD-4/8/12 can be run speed-controlled.
You can manually adjust the individual channels via the channel faders, the Masterfader and via the flash-
buttons.
1. Turn controller ON
2. Select the desired program(s) by pressing the respective Program-button(s).
3. Adjust Masterfader for total output.
4. Adjust Speed-Fader until the spots react in the desired speed.
You can invert the program selection by pressing the Prog. <>-button.
This function is designed for bands etc.

6.5 Memorize a program

With the FD-4/8/12 you can memorize 4 different programs with up to 84 steps each.
Press and hold the Prog. <>-button and select the desired program number via the Program-button. The
Prog. <>-LED is lit and the Program-LED flashes.
Press the Prog. <>-button again and the Prog. <>-LED is off.
Push the Master-fader to maximum.
Push channel-faders to the desired setting.
Press the Program-button in order to memorize the first step. The LEDs flash 3 times.
Repeat the steps mentioned above until you have memorized all steps.
Press and hold the Prog. <>-button and the current Program-button in order to memorize the chaser.
If the program is full, you must first delete the program.

6.6 Adjust Fade Time

Push the Fade Time-Fader to the desired level.
18/20 00028596.DOC, Version 1.2