Clear memory
Press and hold the Record-button.
Press the Rec Clear-button.
Memory is cleared.
Lock program mode
If you want to protect your programs from undesired acces, you can lock the program mode.
Press and hold the Record-button.
Press the Rec Exit-button.
Release the Record-button.
The red LED above the Record-button is off.
Single Chase/Mix Chase
Über die Single Chase/Mix Chase-Taste können Sie den Chaser-Abspielmodus ändern. Im Single Chase-
Modus durchläuft der Controller einen Chaser.
Im Mix Chase-Modus werden alle ausgewählten Chaser gleichzeitig abgespielt.
Switch off individual DMX-channels
You can switch off an individual channel by pressing the Blind-button and the respective Flash-button.
In order to switch the channel on again, press the Home-button and the respective Flash-button.
Set all channels to maximum
Press the Full On-button and all channels will be set to their maximum value. As soon as you release the
button, the channels return to their original setting.
Blackout-Mode
Press the Blackout-button and all devices will be set to Blackout-mode.
Kill-function
Via the Kill-function, you can set only the desired channels to 100 % in a running chaser. All other channels
remain off, the chaser keeps running internally.
Call up the desired chaser. Press the Rec/Exit-button and the Kill-LED shines. Press the desired Flash-
button(s) of the desired channel(s).
MIDI In-mode
Press and hold the Record-button.
Press the Flash-button 1 in Preset A three times.
Release the Record-button.
The display shows "CH-1" and the Scene Setter is in MIDI In-mode.
Select the desired MIDI-channel by pressing the respective Flash-button in Preset A.
Press and hold the Record-button.
Press the Rec Exit-button.
The MIDI-channel was memorized and you are in the normal mode again.
MIDI Out-mode
Press and hold the Record-button.
Press the Flash-button 2 in Preset A three times.
Release the Record-button.
The display shows "CH-0" and the Scene Setter is in MIDI Out-mode.
26/28
00020976.DOC, Version 1.5