Helo FUSION Gebrauchsanweisung Seite 77

MOUNTING THE SAUNA HEATER ON A WALL
With the adjustment legs driven in, the mounting height
of the sauna heater wall mount height is 635mm. The
adjustment legs can be adjusted 15mm is the floor is not
even. The maximum mounting height of the wall mount
is 650 mm. After the mounting, check that all the
adjustment legs are evenly on the floor.
The distance between the holes for the mount in the wall.
Parts for wall mounting:
- part to be connected to the sauna heater
- wall mount
- self-tapping screw 4.2 x 13mm
- coach screw 6 x 40mm
The part to be connected to the sauna heater are passed
through the holes in the heater so that the ingoing
part is turned upwards.
The wall mount is attached to a wall so that
the holes are on the upside.
The mount may also be attached to
the heater beforehand. Mark the screw points
to the wall beforehand and if necessary, drill small
holes for them. Then mount the heater
to the wall with the provided screws.
Wall mount attached to heater.
The parts in the heater are
attached to the mount with self-tapping screws.
2 pcs
1 pcs
2 pcs
2 pcs
240 mm
18