Special Functions In Steam Sauna Mode; Drying Mode; Water Tank Filling Notification - Helo FUSION Gebrauchsanweisung

2.7.

Special functions in steam sauna mode

Few of the control centre functions are availably only when the selected bathing mode is steam sauna.
These include drying mode and alarm for the need of filling the water tank.
2.7.1.

Drying mode

This mode is in use only when the bathing mode is steam sauna. After the
bathing time has expired, the drying program starts automatically. The control
centre indicates this by showing "HOT DRY" on the display and the sauna
heater's buzzer goes off for 10 seconds. After that the control centre show
the remaining drying time and the current temperature of the sauna room.
The drying time is 30 minutes and the temperature setting is 90 °C. The
drying mode may be aborted at any time by pressing the Stop button.
After the drying program has ended, the control centre returns to standby
mode.
2.7.2.

Water tank filling notification

Sauna heater with manual water intake
If the water level is below the lower limit, the sauna heater cuts off steam
production and indicates the need of filling with a buzzer. The
control centre will flash "FILL" on the display. After filling the tank,
the control centre and the sauna heater will automatically return to normal
operation.
Sauna heater with automatic water intake
Sauna heaters with automatic water intake are connected to water supply line,
and the sauna heater will automatically keep the water level up. There is no
notification for filling in this model.
A
1
R
2 A
OK
3
4
A
1
R
2 A
OK
3
4
A
1
R
2
A
OK
3
4
14