Setting The Bathing Program - Helo FUSION Gebrauchsanweisung

2.6.4.

Setting the bathing program

If you do not want to use any programmes bathing programs or you
want to modify one of the existing programs, some settings must be
programmed in the control centre. These settings include bating mode,
time, temperature, humidity (only for steam sauna) and the possible
pre-selection time.
The settings are made with the control centre in use / programming mode.
This mode can be entered by pressing the Start/Stop button when the control
centre is in standby mode. When the control centre is in use / programming
mode, the display show the text "SET PROG". You can move to the next setting
by pressing OK, which also saves the set value.
Selecting bathing mode
The first setting in programming a bathing program is selecting the bathing
mode. You can select either a normal dry and hot sauna (HOT) or milder and
more humid steam sauna (SOFT). The selection is made with the arrow buttons
and confirmed with the OK button. Both the display and the indicator light
show, which bathing mode is selected.
A
1
R
2
A
OK
3
4
A
1
R
2
A
OK
3
4
A
1
R
2 A
OK
3
4
10