Information For Users; Sauna Heater And Its Components - Helo FUSION Gebrauchsanweisung

2.

Information for users

2.1.

Sauna heater and its components

Sauna heater
The Fusion's design and technical properties make it a unique sauna heater. It combines traditional dry
and hot, and a lower temperature and moist way of sauna bathing. The integrated steamer in the sauna
heater makes this possible. The water vapours the steamer produces increases the pleasure of sauna
bathing and it has beneficial effects on skin and health.
The steamer's water tank is situated in the front of the sauna heater, which makes the steam spread more
quickly into the sauna room. It also facilitates maintenance of the water tank. The scent cup on top of
the water tank may be used for aromatherapic scents to increase the invigorating effects of sauna
bathing. NOTE: Do not use scents in the water tank!
There are two possible ways of filling the tank with water, depending on the sauna heater.
Manual water intake
If the sauna heater is equipped with manual water intake, the filling is done by raising the scent cup and
then pouring water into the tank with a jug or similar, up to the max marking. The tank should be filled
always before turning the sauna heater on, because the scent cup will heat up to scalding temperatures
when the sauna heater is turned on.
The water tank capacity is about 5 litres, and there is an indicator at the front of the sauna heater for
viewing the water level.
Automatic water intake (optional)
There is an automatic water intake feature in some models of the sauna heater. This means that the sauna
heater has a water connection and automatic water level measuring. The sensor in the tank senses when
there is a need to increase water in the tank and automatically fills the tank.
Sensors
Two sensors are installed in the sauna room: one temperature sensor and and one humidity sensor. An
electrician installs the sensors, placing them in predetermined points in the sauna room.
Temperature sensor OLET 19
The temperature sensor monitors the temperature of the sauna room and controls the sauna heater
output so that the desired temperature is kept as stably as possible. The sensor has in-built temperature
limiter. The limiter cuts power off the sauna heater, if the temperature in the sauna room raises
dangerously high. Tripping of the limiter will cause an error message in the control centre display, see
page
Humidity sensor OLET 21
The humidity sensor monitors the air humidity in the sauna room and it controls the steamer so that the
humidity is as stable as possible all though the sauna bathing. When the steam feature is in use, also the
humidity sensor measures the temperature of the sauna room.
4