General Settings - Psm - JVC KD-DV4401E Bedienungsanleitung

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 25.
1
Enter the PSM settings.
2
Select a PSM item.
Indications Item
(
DEMO • DEMO ON
Display
demonstration • DEMO OFF
CLOCK DISP *
1 • CLOCK ON
Clock display
• CLOCK OFF
CLOCK HOUR 0 – 23 (1-12)
Hour adjustment
CLOCK MIN 00 – 59
Minute adjustment
24H/12H • 24 HOUR
Time display mode • 12 HOUR
CLOCK ADJ *
2 • AUTO
Clock adjustment
• OFF
24
Setting, [reference page]
: Initial)
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: Cancels.
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [5].
[Initial: 0 (0:00)], [5].
[Initial: 00 (0:00)], [5].
: See also page 5 for setting.
: The built-in clock is automatically adjusted using the CT (clock time)
data in the RDS signal.
: Cancels.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.