Radio Basic Operations; Listening To The Radio; To Tune In A Particular Frequency Without Searching - JVC KD-MX2800R Bedienungsanleitung

RADIO BASIC OPERATIONS

Listening to the radio

1
FM/AM
F1 F2
(FM1) (FM2)
2
SSM
To stop searching before a station is received, press the same button you have pressed
for searching.

To tune in a particular frequency without searching:

1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold ¢
Now you can manually change the frequency while "M" is flashing.
3 Press ¢ or 4
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9kHz intervals for AM–MW/LW) until you release the button.
6
2
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
F3
AM
(FM3)
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
or 4
until "M" (for Manual) starts flashing on the display.
repeatedly until the frequency you want is reached.
1
Selected band appears.
Start searching a station.
When a station is received, searching stops.