Selecting 24-Hour Or 12-Hour Clock; Selecting The Level Display; Selecting The Dimmer Mode - JVC KD-MX2800R Bedienungsanleitung

Selecting 24-hour or 12-hour clock

You can change the clock built in this unit either to 24 hour system or 12 hour system.
1. Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the lower
part of the display.
2. Select "CLOCK24H/12H" with ¢
3. Select "CLOCK 24HOUR" or "CLOCK 12HOUR" with the control dial.
The clock alternates between 24-hour system and 12-hour system.

Selecting the level display

You can select the level display according to your preference. When shipped from the factory,
the level indicator on the display shows the audio level setting.
• NORMAL: Audio level indicator
• PEAK: Peak level indicator
• OFF: Volume level indicator
1. Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the lower
part of the display.
2. Select "LEVEL METER" with ¢
3. Select the desired mode with the control dial.
The level display setting changes as follows:

Selecting the dimmer mode

When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO: Activates Auto Dimmer
• ON: Always dims the display
• OFF: Cancels Auto Dimmer
1. Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the lower
part of the display.
2. Select "DIMMER MODE" with ¢
3. Select the desired mode with the control dial.
The dimmer mode changes as follows:
Note on Auto Dimmer:
Auto dimmer provided for this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to "ON" or "OFF."
or 4
24HOUR
or 4
NORMAL PEAK
or 4
AUTO ON
.
12HOUR
.
OFF
.
OFF
33