Md Operations; Playing An Md; To Change The Display While Playing An Md - JVC KD-MX2800R Bedienungsanleitung

Playing an MD

1
1
2
Label side
Insert an MD in the same way as
indicated on the MD
Note on One-Touch Operation:
When an MD is already in the loading slot, pressing MD/CD turns on the unit and starts
playback automatically.
To stop play and eject the MD
Press 0.
MD play stops, the control panel opens, then the MD automatically ejects from the loading slot.
If you change the source to FM/AM, CD changer or external component, the MD play also
stops (without ejecting the MD this time).
Notes:
• If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into
the loading slot to protect it from dust. (MD play will not start this time.)
• You can eject the MD even when the unit is turned off.
• You cannot insert a CD and an MD inside the unit at the same time.
• When you insert an MD recorded in monaural, it will be played in monaural. While playing such a
monaural MD, the elapsed playing time may not be displayed correctly.

To change the display while playing an MD

Press DISP. Each time you press the button, the display changes to show the following:
Track number and Elapsed playing time
Note:
If "SCROLL MODE" is set to either "AUTO" or "ONCE", names including more than 12 characters
will be scrolled. (See page 37.)

MD OPERATIONS

Open the control panel.
If there is already a CD or an MD inside the unit,
it ejects automatically.
1. Insert an MD into the loading
slot.
The unit turns on, draws the MD and starts
playback automatically.
2. Close the control panel by hand.
Title of the track
Elapsed
playing time
Current track
Disc title
Track title
23