Troubleshooting - JVC KD-MX2800R Bedienungsanleitung

What appears to be trouble is not always serious. Check the following points before calling a
service center.
Symptoms
• CD cannot be played back.
• CD or MD sound is
sometimes interrupted.
• Sound cannot be heard from
the speakers.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
• Static noise while listening to
the radio.
• "NO DISC" appears on the
display.
• "RESET 8" appears on the
display.
• "RESET 1-RESET 7" appears
on the display.
• CD or MD can be neither
played back nor ejected.

TROUBLESHOOTING

Causes
CD is inserted upside down.
You are driving on rough roads.
The disc is scratched.
Connections are incorrect.
The volume control is turned to
the minimum level.
Connections are incorrect.
"P. AMP (Power Amplifier)
SWITCH" is not set correctly.
Signals are too weak.
The antenna is not connected
firmly.
No CD is in the loading slot (or
in the magazine).
The CD is inserted incorrectly.
This unit is not connected to a
CD changer correctly.
The unit may function
incorrectly.
Remedies
Insert the CD correctly.
Stop playing CD or MD while
driving on rough roads.
Change the disc.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Set "P. AMP SWITCH" correctly.
See page 36.
Store stations manually.
Connect the antenna firmly.
Insert a CD.
Insert it correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the CD
changer.
Press MD/CD and SEL at the
same time for more than 2
seconds. ("PLEASE EJECT"
appears on the display.) When
you open the control panel by
pressing 0, be careful not to drop
the disc when it is ejected.
CONTINUED TO THE NEXT PAGE
49