Transponder List - Philips DSR3131H Benutzerhandbuch

LNB volts
The LNB voltage of the satellite receiver provides the LNB with an operating voltage and ensures
switching at the various reception levels. Note: Leave always on the LNB voltage.
Unicalbe
Each receiver needs individual settings concerning. IF channel and IF frequency. Highlight each antenna
socket or each antenna cable with the added thought settings so that they are visible to the user. If
settings are changed, should be turned as far as possible all the recipients connected to the affected
single-cable system, if the settings are applied.
Can switch Deactivate/1/2/3/4/5/6/7/8/. If switch to 1~ 8, can set "Center frequency" and "Port".
Center frequency
Ask here by multitap using the number buttons, the added thought for your receiver and the
single-cable system also supported exact IF frequency. The new settings will take effect the next time
you turn on the receiver.
Port
Set this "A" or "B".

5.2.3 Transponder list

To search for a single transponder. This search method is advisable if you want to save only a particular
program or program package. The respective reception parameters (frequencies, etc.) are available
from the Internet or TV and trade magazines.
Satellite selection
In " Satellite Scan" Press ▲ / ▼
have a
supported satellites.
Edit Transponder
◄ ►
Highlight with / and ▲ / ▼ a transponder
entry. Do you want to scan the selected
transponder for the selected satellite for new
channels, press the green button. After setting
the search options described above, the search
can be started by pressing the green button.
To add a new or edit a selected transponder entry, press the yellow button.
The frequency of a satellite transponder the existing list is predefined and
should not be changed under normal circumstances.Change the values by
directly entering.
23