General Viewing Function; Channel Information; Channel Selection; Using Or Numeric Keys - Philips DSR 300/00 Benutzerhandbuch

6

General Viewing Function

18 GENERAL VIEWING FUNCTION
This section describes the basic functions available while
watching satellite TV or listening to satellite Radio. For
general menu navigation information, see Basics about menu
navigation.
6.1

Channel Information

Every time you change channels, program information
appears on screen, displaying:
- the current time and date
- the current service (TV/R), channel number in the current
channel list and channel name,
- icons indicating the channel properties, e.g. channel lock
status, available audio languages, subtitling,
- the start time of the current and next programs and the
current program name.
While watching a channel, you can display the current
channel information at anytime by pressing <INFO> on the
remote control.
Note: channel information is displayed for 5 seconds as per
default. This can be adjusted from the Setup menu.
6.2

Channel selection

6.2.1 Using <P+/P-> or numeric keys
To switch channels, use <P+>/<P-> or the numeric keys of
the remote control.
6.2.2

Using the channel list

- For a complete overview of the available channels while
watching satellite TV or listening to satellite radio, press
<OK> on the remote control. A channel list is displayed
on the left-hand side of the screen.
Note: if you press <BACK>, the channel list disappears.
- To select a channel, scroll up or down this channel list, and
then press <OK> to watch it.